Stainless Steel 321 (UNS S32100) is a titanium stabilized austenitic stainless steel with good general corrosion resistance. Tavasya Industries is a leading supplier and exporter of Stainless Steel 321 Round Bar. We provide Stainless Steel 321 Round Bar as per the requirements of our customers and deliver quality products on time. Stainless Steel 321 Round Bar comes in sizes from 8mm to 300mm.
Stainless Steel 321 Round Bars are available in different types such as Stainless Steel 321 Round Bars (ASTM B / ASME SB 166), Stainless Steel 321 Round Bars & Bars Exporter in Mumbai, India, 321 Stainless Steel Round Bars, Stainless Steel UNS S32100 Round Bars & Bars, Stainless Steel 321 Bright Bar & Rods, Stainless Steel DIN 1.4541 Round Bars & Rods, Stainless Steel UNS S32100 Bars, Stainless Steel 321 Polish Bars, Stainless Steel 321 Black Bar, Stainless Steel 321 Forged Round Bar Exporters
Stainless Steel 321 (UNS S32100) Round Bars has brilliant resistance to intergranular erosion after introduction to temperatures in the chromium carbide precipitation scope of 800 – 1500°F (427 – 816°C). The alloy opposes oxidation to 1500°F (816°C) and has higher creep and stress rupture properties than combinations 304 and 304L. It additionally has great low temperature sturdiness. Alloy 321H (UNS S 32109) is the higher carbon (0.04 – 0.10) variant of the alloy. It was produced for creep resistance and for higher quality at temperatures above 1000oF (537°C). In many examples, the carbon substance of the plate empowers double confirmation.
Stainless Steel 321 Round Bars is widely used in general engineering applications. SS 321 Round Bars is also used in heat exchanger application. On the other hand, these Stainless Steel 321 Round Bars is used in refineries, power plants and ship buildings.
C |
Mn |
P |
S |
Si |
Cr |
Ni |
Mo |
Cu |
N |
Other |
0.08 max |
2 max |
0.045 max |
0.030 max |
0.75 max |
17 - 19 |
9 - 12 |
0.75 |
0.75 |
0.10 |
Ti=5x(C+N) min to .70 max |
| Density | 7.92 g/cm³ |
| Melting Point | 2550-2635° F 1398-1446° C |
| Tensile Strength | Psi – 75000 |
| Yield Strength (0.2%Offset) | Psi – 30000 |
| Elongation | 40 % |
| Designation | ASTM, ASME, AISI A 276 , SA 276, A 479, SA 479 |
|---|---|
| Range | 3.17 MM TO 350 MM DIA |
| Size Tolerance | h8, h9 (DIN 671), h10, h11,ASTM A484, DIN 1013 |
| Diameter | 25mm to 152 mm |
| Finish | Bright, Polish & Black |
| Form | Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wire-mesh, Billet, Ingot, Forging Etc. |
| Condition | Cold Drawn & Polished Cold Drawn, Centreless Ground & Polished |
| Application | Aerospace – piston engine manifolds, Chemical Processing, Expansion Joints, Food Processing – equipment and storage, Petroleum Refining – polythionic acid service, Waste Treatment – thermal oxidizers. |
| Sheet/Plate | Round Bar/Wire | Pipe & Tube | Fittings | Forgings |
| ASTM A240, ASME SA240 | ASTM, ASME, AISI A 276 , SA 276, A 479, SA 479 | ASTM A/ASME SA213/A249/A269/A312/A358 | ASTM A403 / ASME SA403 | ASTM A182 / ASME SA182 AMS 5666 |
Tavasya Industries exports ASTM A276 Stainless Steel 321 (UNS S32100) Round Bar to Saudi Arabia, UAE, Bahrain, China, Peru, Nigeria, Jordan, Muscat, Kuwait, Dubai, Thailand (Bangkok), Venezuela, Germany, Canada, Russia, Australia, Vietnam, Kazaksthan, Jiddah, Libya, Yemen, Algeria, Qatar, Oman, Iran, United States Of America, United Kingdom, Australia, South Africa, Mexico, Turkey, France, European Union, New Zealand, Angola, Congo, Kenya, Lebanon, Spain, Indonesia, Malaysia, Lebanon, Iraq, Iran, Egypt, Madagascar, Sri Lanka, Denmark, Poland, Italy, Brazil, Sudan, Singapore And Netherlands.
For any enquiries related to ASTM A276 Stainless Steel 321 (UNS S32100) Round Bar, kindly contact us on :-
